Depending on the amount of JB-Weld used on the corner screws, you might need to trim the PT-10 mount holes, making them like countersunk screw holes (tapered out). The best way to strip the insulation from the wires is to lightly score with a knife on the flat side, i.e. cut half-way through the insulation, not cutting to the wire, then do small cuts between each wire (from the score line to the end), then pull off each little bit of insulation with pliers, being careful not to grip the wire too much and pull the wire out. Here is a guide to soldering the wires to the LCD. I've suggested not soldering R40-R55 until now. April 21, 2002 -We have been on version 2 of the forum software for about a week now. October 17, 2002 -OK, I'm starting the BIG update. February 10, 2002 -You will all note that the Discussion Forums have been down for a while now.

Note Bugfight created a detachable solution by using Right Angled SIL Headers on the base PCB in this this thread. Added a note on flashing the Professional radios with a RIB-less cable. You can check if your parallel port is compatible with the X1541 cable with X1541Test. The most important feature of the parallel port of your PC is its mode. SPP mode means bidirectional control lines and unidirectional data lines. The principal part of the system, the control cables, must be chosen after in-depth analysis and thorough deliberations only. Added some info to the Spectra page on a possible way to recover form the FAIL 01/90 error, as well as some more manual part numbers. VCO tuning procedure was the result and is available on the Spectra page. Fixed the links on the Utilities and Resources page. Added a warning to the Maxtrac page about repeater/linking modifications and 900MHz radios. Corrected the programming cable pinout for the GP900, it is the same as the MTSX series radios.

Added the rest of the pin names to the MSF5000 control jack pinout. EPP and ECP offers several enhanced features, that PC software can make use of, but the control lines are not bidirectional anymore in these modes. PS/2 mode and "Enhanced" for either the EPP or the ECP mode. Possible modes are SPP, PS/2, EPP and ECP. Here's a compatibility chart between cables and parallel ports of different modes. The wires are not braided but lay parallel to each other to provide unbroken coverage and a significant degree of mechanical protection for the inner conductors. If you are crazy and want to do illuminated knobs, NOW is the time to solder wires between the LEDs on each rotary encoder. The PVC sheath will not provide much protection from UV light, leaving the cable vulnerable to decay over time. Let me construct from experience the finance of a cable system. Also, they are either buried or found within an organization.- The control cable standard is 9330, while for the power cable, what is control cable it is GB12706.- Power cables have a specific color code system differentiating between high and low-voltage carriers. It would appear that there was a major system crash, and that is why they went down.

There are two other types of control cable - CY and YY. Make sure there are NO SHORTS between any two adjacent pins of the ribbon cable joints. Owing to its terrible climate, three operators have to be provided where two would suffice elsewhere. They are not hosted locally, and we do not have control over the servers they reside on. The custom-manufactured control cable would be delivered at the scheduled time. Thus Germany, too, has accomplished her desire of obtaining cable connection with the Far East independently of British cables. In 1880 the British Cable Company arranged with the Spanish Government to lay a cable from Hong Kong to Cape Bolinao, near Manila, the capital of the Philippines. Accordingly, in 1883-1884, the British company decided at all hazards to make a move north, and laid cables from Hong Kong to Foochow, and thence to the Danish stronghold of Shanghai. If, while Germany and France use the funds of the State to subsidize and support German and French cables, Great Britain similarly uses her national credit, as is the case of the Pacific cable, against her own people, then British enterprise, hopelessly overweighted by such an overwhelming combination, will roll up its cables and sell them for what they are worth.